This bath is designed and developed under the strict supervision of our experienced professionals in accordance with the international quality standards. Our offered bath is thoroughly checked on various parameters to ensure zero-defect. This bath is widely used in national laboratories and pharmaceutical industries. Features
Intelligent signal sampling for accurate data measuring and parameter reading
Accurate viscometer for improving experimental efficiency
High precision digital display
Ideal for controlling the temperature accuracy
Durable glass bath for optimum heat preservation
Desktop based all-in-one design for easy operations and portability
Electric stirrer for ensuring uniform temperature of bath
On-flammable solvent liquids used for the binder extraction test can be successfully recovered using the solvent recovery unit.
The recovery unit consists of two stainless steel chambers, one for the dirty used solvent and the other for the cleaned recovered solvent. Solvent in the left-hand side chamber is distilled by an electrical heater and then passes through a water cooling system and drops into the second chamber ready for re-use. A temperature switch automatically stops the heating elements when the recovery process is completed. The unit is supplied complete with 10 m plastic tubing, tube clamps, sieve insert 0.6 mm opening and one lid. The solvent recovery unit is supplied complete with:
ASTM D88, D244, AASHTO T72
Say bolt Viscometer, Electrically Heated, ASTM D88,
D244, AASHTO T72 for the empirical measurement of
Say bolt Viscosity of petroleum products at specified
temperatures between 70OF and 210OF. This is also
used for determining the Saybolt Furol Viscosity of
bituminous materials at temperatures of 250, 275, 300,
350, 400 and 450OF. It comprises one each of
Cylindrical Oil Cup, Universal Tip, Furol Tip, Bath Fitted
with immersion Heater mounted on a stand. Dimmer stat
for temperature control, Stirrer with shield. Complete with
insulated handle and thermometer support receiving
flask, withdrawal tube, filter funnel, thermometer support
for cup and circular spirit level. Suitable for operation on
230 V 50 Hz, Single Phase, A.C.
ASTM D88, AASHTO T72
The viscometer can be used for temperatures between 21 to 99oC (70 to 210oF) the viscometer includes water- oil bath, stirrer, cooling coil, electric heater with digital thermo regulator, furol orifice, universal orifice, thermometer support and 2 x 60 ml glass Saybolt Viscosity Flask.
Viscosity thermometer set consists of 6 thermometers with the temperature ranges; 19 to 27oC, 34 to 42oC, 49 to 57oC, 57 to 65oC, 79 to 87oC (250 mm length) and 95 to 103oC where each thermometer with 0.1oC subdivisions. Filter funnel, withdrawal tube and thermometer set should be ordered separately.
Electrical Heating with Immersion Heating Elements and Dimmer stat for controlling the temperature. Suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply. Supplied complete with 10mm cup and valve.
A
B
C
D Optional Extras
E Thermometer IP 8C, Range: 0o to 45o C
F Thermometer IP 9C, Range: 40o to 85oC
G Thermometer IP 10C, Range: 76o - 122o C