Specification :
To make process of sieving simpler and quicker, Rotap sieve
shaker is useful , this produces circular shaking of the sieves.
At the same time the sieves are tapped. The mechanism for
imparting circular action and topping is oil immersed in a tank
and in motorized. The shaker can accommodate upto 7 nos.
Sieves of dia 150mm or 200mm. Suitable operation of
230 V A.C. Single Phase.
Specification :
Carries upto 7 sieves of 150 or 200 mm diameter. The shaker
is driven by a 1/4 H.P. Motor through a reduction gear immersed
in oil. The sieve table does not rotate but is inclined from the
vertical axis and the direction on inclination charges
progressively in clockwise direction. If the stop pin below the
table is removed, the shaker can have a rotary motion. In addition
to this gyratory motion of the table, there is an upward and
downward movement ensuring that each square cm of the
sieve is utilized. A pair of rods and a holder can be fixed on the
top of the upper most sieve, and thus the sieve set in firmly held.
Suitable for operation from 230 V 50 Hz, Single phase A.C.
supply.
a) Adopter for 300 mm dia. sieve available at extra cost
b) Adopter for 450 mm dia. sieve available at extra cost
This is yodar type, motor driven sieve shaker for carrying out wet
sieve analysis of materials. Specification :
Consists of a water reservoir and a holder for sieves, which
can take up to 7 sieves of 150mm or 200mm diameter.
Shaker is driven by a ¼ H.P. motor through a belt drive. Shaker
mechanism moves the sieves up and down in the reservoir. The
reservoir has a water out-let for draining out the used water.
Suitable for operation
230 V A.C. Single Phase
BS 812
A. Bristle round brush 30 mm.
B. Nylon sieve brush 33 mm.
C. Soft Hair brush 3 mm dia.
D. Double ended brass & nylon bristle.
E. Double ended nylon sieve brush.